Connecting A Dtv Receiver/Set-Top Box With Colorstream ® (Component Video) And A Vcr - Toshiba 32HF73 Owner's Manual

Connecting a DTV receiver/set-top box with
®
ColorStream (component video) and a VCR
This connection allows you to watch DTV (digital TV), VCR, and
TV programs, and record DTV and TV programs.
Your TV has ColorStream (component video) inputs. Connecting
your TV to a DTV receiver with component video inputs can greatly
enhance picture quality and realism.
– To record and watch a DTV program, select LINE IN on the
VCR, and select ColorStream HD-2 (or VIDEO 1 for a non-
ColorStream connection) on the TV (see "Selecting the antenna
input" on page 21).
– To record a TV program while watching a DTV program, tune the
VCR to the channel to record, and select ColorStream HD-2 on
the TV.
– To record and watch the same TV program, tune the VCR to the
channel to record, and select VIDEO 1 on the TV.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
You will need:
• three coaxial cables
• two sets of A/V cables
• one pair of audio cables
• one set of component video cables (one S-video cable for a DTV
receiver without component video; see notes at right)
Stereo VCR
From
IN from ANT OUT to TV
Antenna
TV
ANT( 75
ANT-1 OUT
COLOR
VIDEO 1 VIDEO 2
STREAM HD-1
S-VIDEO S-VIDEO
P
VIDEO VIDEO
P
L/ L/
MONO MONO
L
AUDIO AUDIO AUDIO
R R R
IN
From
DTV Antenna
Satelite IN
S-VIDEO
DTV Receiver with component video
VIDEO AUDIO
L R
IN
CH 3
OUT
CH 4
)
DVI/HDCP IN
ANT-2
COLOR
STREAM HD-2
Y Y
AUDIO
R L
B P B
VIDEO
AUDIO CENTER
P
R R
CHANNEL IN
L/
MONO
L
L
VAR
AUDIO AUDIO
AUDIO
ON OFF
R R R
OUT
AUDIO
OUT
L
Y P P
B R
R
COMPONENT VIDEO VIDEO
OUT
Note:
For the highest possible picture quality, use
component video cables between the TV and
DTV receiver. You can connect the
component cables from the DTV receiver to
either ColorStream jack on the TV (HD-1 or
HD-2).
The ColorStream HD-1 and HD-2 jacks can
be used with Progressive (480p, 720p) and
Interlace (480i,1080i) scan systems.
If your DTV receiver does not have
component video inputs, use the S-video and
standard audio connections instead of the
ColorStream connections. Do not connect
both an S-video and a standard video cable
between the TV and DTV receiver at the same
time.
To monitor recording, set the TV to VIDEO 1.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
L
R
11