Toyota Yaris Owner's Manual page 186

186
4-2. Driving procedures
Stopping the engine
1
Stop the vehicle.
2
Shift the shift lever to P (Multidrive) or N (manual transmission).
3
Set the parking brake. (P. 201)
4
Press the engine switch.
5
Release the brake pedal (Multidrive) or clutch pedal (manual trans-
mission) and check that the smart entry & start system indicator
light (green) is off.
Changing engine switch modes
Modes can be changed by pressing the engine switch with brake
pedal (Multidrive) or clutch pedal (manual transmission) released.
(The mode changes each time the switch is pressed.)
*
Off
The emergency flashers can be
used.
The smart entry & start system
indicator light (green) is off.
ACCESSORY mode
Some electrical components such
as the audio system can be used.
The smart entry & start system
indicator
slowly.
IGNITION ON mode
All electrical components can be
used.
The smart entry & start system
indicator
slowly.
*
: Vehicles with a Multidrive: If the shift lever is in a position other than P
when turning off the engine, the engine switch will be turned to ACCES-
SORY mode, not to off.
light (green) flashes
light (green) flashes