Toyota Yaris Owner's Manual page 132

132
3-2. Opening, closing and locking the doors

Notes for the unlocking function

A sudden approach to the effective range or door handle may prevent the
doors from being unlocked. In this case, return the door handle to the origi-
nal position and check that the doors unlock before pulling the door handle
again.

Gripping the door handle when wearing a glove may not unlock the door.
Remove the gloves and touch the sensor on the back of the handle again.

If the door handle becomes wet while the electronic key is within the effec-
tive range, the door may lock and unlock repeatedly. Place the key in a posi-
tion 2 m (6 ft.) or more separate from the vehicle while the vehicle is being
washed. (Take care to ensure that the key is not stolen.)

If there is another electronic key in the detection area, it may take slightly
longer to unlock the doors after the door handle is gripped.

When the vehicle is not driven for extended periods

To prevent theft of the vehicle, do not leave the electronic key within 2 m
(6 ft.) of the vehicle.

The smart entry & start system can be deactivated in advance. (P. 489)

To operate the system properly
Make sure to carry the electronic key when operating the system. Do not get
the electronic key too close to the vehicle when operating the system from the
outside of the vehicle.
Depending on the position and holding condition of the electronic key, the key
may not be detected correctly and the system may not operate properly. (The
alarm may go off accidentally, or the door lock prevention function may not
operate.)

If the smart entry & start system does not operate properly

Locking and unlocking the doors: Use the mechanical key. (P. 451)
Starting the engine: P. 451


Customization
Settings (e. g. smart entry & start system) can be changed.
(Customizable features: P. 489)

If the smart entry & start system has been deactivated in a customized
setting

Locking and unlocking the doors:
Use the wireless remote control or mechanical key. (P. 115, 451)
Starting the engine and changing engine switch modes: P. 451

Stopping the engine: P. 186
