Casio D'Z IMAGE DERMOCAMERA DZ-D100 User Manual page 68

. Cleaning the inside of the lens
If dirt or dust gets into the lens, use the procedure below to clean it.
1.
Fit the lens removal tool (DLR-100M) and remove the lens top from the
camera body.
Align the lug on the lens removal tool with the notch in the lens top.
Lens top
2.
Use a blower or similar tool to blow out any dirt or dust that has got
into the lens.
3.
Use the lens removal tool to re-attach the lens top to the camera body.
When attaching the lens top to the camera body, rotate the lens top until the
notch is back in its original position.
NOTE
• Note that you should only remove the lens when absolutely necessary, as doing so
can result in dirt getting into the lens.
. LED light
• Do not look directly at the LED light or look directly into the close-up lens at the
front of the camera when it is switched on. This could lead to the eye being
exposed to strong light which could cause impaired eyesight.
• When photographing close to the eye, take care not to shine light directly into the
the eye.
• Using the light at the HIGH brightness setting for long periods can cause the
temperature of the light at the tip of the close-up section to exceed 41°C (106°F),
reaching a maximum of 46°C (115°F). Be sure to switch the light off when not
taking pictures.
Camera
Lens removal tool
68
Appendix