Table of Contents
Advertisement
INSTRUCTIONS FOR USE
BEFORE STARTING THE CUT
•
Inspect the clipper making sure that it is free from hair and dirt.
•
Seat the person so that their head is approximately at your eye level.
•
Before cutting, always comb the hair so it is tangle free and dry.
TO ATTACH A COMB
•
Hold the comb with its teeth upward.
•
Slide it onto and along the clipper blade until the front of the comb firmly sits
against the clipper and click into position.
TO REMOVE THE COMB
•
Holding the clipper with the blades facing away from you, firmly push the comb
upward and away from the blades.
•
Each comb attachment is marked accordingly on its outside middle surface.
•
Please note a 0.5mm cutting length can be achieved from holding the clipper, with
no comb attachment, perpendicular to the skin. A 1.0mm cutting length is achieved
from holding the clipper, with no comb attachment, with the top of the blade
surface in contact with the skin.
•
This is with the taper setting set at the closest gap between the blades.
INSTRUCTIONS FOR CUTTING HAIR
•
For even cutting, allow the comb attachment/blade to cut its way through the hair.
Do not force it through quickly. If you are cutting for the first time, start with the
maximum comb attachment.
4
Guide Combs
1 (# 0)
2 (# 1)
3 (# 2)
4 (# 3)
5 (# 4)
6 (# 5)
7
8
9
Cutting Length (mm)
1.5
3
6
9
12
16
18
22
25
Advertisement
Table of Contents
