Table of Contents
Advertisement
BXR836 RIDE-ON TROWEL INSTRUCTION MANUAL
QUALITY ASSURANCE / MACHINE BREAK IN
The Bartell Ride-on Trowel is the product of extensive engineering development designed
to give long life and unmatched performance. Once machines are fully assembled, a run-
in test is performed to ensure quality standards of the highest level.
operational tests are conducted on concrete, incorporating a phase of operations at 1/2 to
3/4 throttle and a final run phase at full throttle for a minimum of 20 minutes.
You can help ensure that your Ride-on will perform at top levels by observing a simple
routing on first use. Consider that your new Ride-on Trowel is like a new car. Just as you
would break in a new car to the road or any new machine to the job, you should start
gradually and build up to full use. Learn what your machine can do and how it will
respond. Refer to the engine manufacturer's manual for run-in times. Full throttle and
control may be used after this time period, as allowed by material. This will serve to
further break in the machine on your specific application, as well as provide you with
additional practice using the machine.
We thank you for the confidence you have placed in us by purchasing a Bartell Ride-on
Trowel and wish you many years of satisfied use.
375 ANNAGEM BLVD. – MISSISSAUGA – ONTARIO – CANADA – L5T 3A7 – 866-501-1683 – FAX 905-364-4200
375 ANNAGEM BLVD., MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201
25 INDUSTRIAL DR. – KEYPORT – NEW JERSEY – USA – 07735 – 888-999-1570 – FAX 732-566-5444
200 COMMERCE DRIVE, FREEHOLD, NEW JERSEY, USA, 07728, 732-566-6400 FAX 732-566-5444
BARTELL MORRISON INC.
BARTELL MORRISON (USA) LLC
A series of
4
4
Created: 05/2012
Revised: 00
CREATED: 07/04
Revised: 05/2012
REVISED: 06/14
Advertisement
Table of Contents
