Hunter Caribbean Breeze Instructions Manual page 10

Downrod (continued)
contatobrasil@hunterfan.com
1 cm
20 cm
Remove the pre-installed The wires can be cut,
Hand tighten the downrod (at Tighten the setscrew
setscrew so that the downrod but leave at least 20 cm
least 4-5 full turns) until it stops. with pliers. DO NOT
can be inserted. extending from the top of
HAND TIGHTEN.
the downrod.
20 cm 1 cm
If the setscrew is not tightened
securely, the fan may fall.
8
MD500-01 • 05/21/14 • © Hunter Fan Company