Graco Extend2Fit Instruction Manual page 89

3-in-1 car seat
Hide thumbs Also See for Extend2Fit:
Table of Contents

Advertisement

2. Slide Entire Lower Anchor Strap Along
Bar to Correct Belt Path Opening
Rear-Facing:
down to the blue label.
Forward-Facing:
anchor strap up to the orange label.
3. Feed the InRight™ Lower Anchor Connector with the Adjuster
Closest to it Through the Chosen Belt Path
de
Rear-Facing:
strap when the buckle is in the inner-most position (A), and in behind when in
the outter-most position (B) and that it is flat and is not twisted.
Slide lower anchor strap
slide the lower
Make sure the lower anchor strap is in front of the buckle
A
89
B

Advertisement

Table of Contents
loading

Table of Contents