Acer Altos T350 F2 Faq page 75

Altos T350 F2 FAQ (Frequently Asked Questions)
Now you can reboot the system and install the Operating System. Select Exit, click
r.
on Yes and press Ctrl+Alt+Del to reboot the system.
14. How do I check the settings of coercion with the integrated RAID Module
RMS25CB040/RMS25CB080?
ANSWER: Please enter RAID BIOS utility (press CTRL-G during POST) and select Adapter
Properties -> Coercion Mode.
15. Does the integrated RAID Module RMS25CB040/RMS25CB080 support HDD location function?
ANSWER: Yes. You can identify the physical HDD or the virtual drive through the HDD location
function of RAID BIOS utility during POST or RAID utility in Windows/Linux.
When you execute the function, the status of HDD activity indicator will be amber blinking.
NOTE. The LEDs on drives that are global or dedicated hotspares do not blink.
16. How do I identify the HDD with the HDD location function?
ANSWER: You can identify the physical HDD or the virtual drive through the RAID BIOS utility
during POST or RAID utility in Windows/Linux.
RAID BIOS utility:
•
a. Please press CTRL-G to start the RAID BIOS utility during POST
b. In the Home page, click on the physical or logic HDD that you want to locate. Then,
select the "Locate" option and click Go
• RAID utility in Windows/Linux:
a. Launch the RAID utility
b. Click the physical HDD desired in Physical tab
c. Right click the on the HDD. Then, select "Start Locating Drive"
To stop the LEDs from blinking, select "Stop Locating Drive"
17. What is the default setting of disk write cache of the integrated RAID Module
RMS25CB040/RMS25CB080?
ANSWER: The default setting of disk cache of virtual drive is Unchanged.
75