Acer Altos T350 F2 Faq page 25

Altos T350 F2 FAQ (Frequently Asked Questions)
9. How do I specify the IQN (iSCSI Qualified Name) in Linux?
ANSWER: You can specify the IQN by editing the file /etc/initiatorname.iscsi as below:
InitiatorName=iqn.1994-05.com.redhat:5e7a5b52c81c
10. Is network teaming supported on any system which carries iSCSI traffic?
ANSWER: No.
http://www.intel.com/support/motherboards/server/sb/CS-027892.htm
Network teaming using Intel's ANS (i.e., PROSet utility) is not supported for those ports
transferring iSCSI traffic. This is due to limitations of the third-party iSCSI
target/initiator software.
For load balancing and failover support in Microsoft Windows* operating systems, you can
use Microsoft's* MPIO (MultiPath I/O). Check the Microsoft Initiator User Guide on how
to setup MPIO.
25