INSTALLATION AND WIRING
(6) Remove the PU cover provided on the front cover for plug-in option and mount the other PU cover,
which was removed in (2).
(7) Loosen the terminal screws and insert the wires into the terminals. After that, fasten the terminal screws
to the recommended tightening torque. (Refer to page 9)
(8) After wiring of the plug-in option has been completed, mount the front cover for the plug-in option to the
inverter.
Front cover
for plug-in option
(6) Replace
6
(3) Hexagon
(5) Mounting screws
(short)
(8)
spacer
(4)
(7)
(3) Spacer for plug-in option mounting
(5) Mounting screw (long)
(3) Plug-in option connector
of inverter
(3) Junction connector