Asus RT-AX92U Quick Start Manual

Quick
Start Guide
RT-AX92U
Wireless AX6100 Tri band Gigabit Router
BEFORE SETTING
Preparing to setup a standalone router
01
1 Go to ONE ROUTER SETUP STEPS.
ONE ROUTER SETUP
ONE ROUTER SETUP STEPS

Prepare your Modem

01
Unplug the power of cable / DSL modem.
1
If it has a battery backup, remove the battery.
1
Connect your Device
02
Power on the router.
1
Plug in and press the
1 power button at the
back of your router.
2 Check the WAN and
2.4GHz / 5GHz LED
lights to ensure the
hardware connection
is ready.
AiMesh
SETUP STEPS
Prepare
01
Place your AiMesh router and node within
1-3 meters of each other during the setup
process.
AiMesh node
02
Factory default status. Keep power on
and standby for AiMesh system setting.
Hardware Explanations
1 Plug the adapter into the DCIN port, and press the power button.
2 The Power, 2.4GHz and 5GHz LEDs will light up when your hardware is ready.
Button Explanations
Reset
button
USB Explanations
02
WE SUGGEST...
Connect your modem
2
network cable provided.
Power on the modem.
3
Plug modem to the power
outlet and power on.
3 Connect your PC to the router using an additional
network cable.
02
Power DCIN WAN
LAN port 1-4
button port port
WPS USB 2.0 USB 3.0
button port port
Preparing to setup an AiMesh Wi-Fi system
Two (2) ASUS routers (models supporting AiMesh https://www.asus.com/AiMesh/ ).
1
2 Assign one as AiMesh router, and another one as AiMesh node.
** If you have multiple AiMesh routers, we recommend using the router with the highest specifications as your
AiMesh router and the others as AiMesh nodes.
3 Go to AiMesh SETUP STEPS.
AiMesh node
AiMesh SETUP STEPS
Check the modem LED lights
4
to ensure the connection is active.
Login and Connect
03
1 Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not, navigate
to http://router.asus.com.
within
1-3 meter
AiMesh node
RESET BUTTON
Reset the system to its factory default settings.
WAN PORT
Connect your modem to this port with a network cable.
LAN PORT 1-4
Connect your PC to a LAN port with a network cable.
AiMesh router
If you are using DSL for internet, you
(
will need your username / password
from your Internet service provider
(ISP) to properly configure your router.
03
AiMesh router
(