ECS 945PL-A Manual page 37

Max CPUID Value Limit (Disabled)
Use this item to enable or disable the Max CPU ID value limit. When supports Prescott and LGA775
CPUs, enables this item to prevent the system from "rebooting" when trying to install Windows
NT4.0.
Vanderpool Technology (Enabled)
This item enables or disables the Vanderpool Technology.When disabled,forces the VT function will
close.
Excute Disable Bit (Enabled)
This item is a security feature that helps you protect your CPU and operating system against
malicious software executing code. This item is available when CPU supports the feature and it is an
optional item.
Core Multi-Processing(Enabled)
Use this item to enable or disable the Core Multi-Processing.
CPU Over-clocking Func. (Disabled)
This item decides the CPU over-clocking function/frequencyinstalled in your system. If the over-
clocking fails, please turn offthe system power. And then, hold the PageUp key (similar to theClear
CMOS function) and turn on the power, the BIOS willrecover the safe default.
PCIE CLK Synchronize
This item enables or disables you to select PCIE CLK Synchronize or asynchronous.
Press <Esc> to return to Advanced BIOS Features setting page.
Floppy Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (c) 1985-2004, American Megatrends, Inc.
Floppy Configuration
Floppy A
: Move Enter : Select
F7:Previous Values
Floppy A( 1.44 MB 3 ½)
Use this item to set up size and capacity of the floppy diskette drive(s) installed in the systems.
Press <Esc> to return to Advanced BIOS Features setting page.
Floppy Configuration
Help Item
½"
[1.44 MB 3 ]
Select the type of
floppy drive
connected to the
system.
+/-/:
Value
F10: Save ESC: Exit
F9: Optimized Defaults
F8:Fail-Safe Defaults
Using BIOS
F1: General Help
31