Power Up; Custom Date Display; Settings Menu - La Crosse Technology 308-1412-3TXV2 Instruction Manual

1. Remove the battery cover from all three Outdoor Sensors. Select a different Channel on each sensor.
2. Install 2-AA batteries (not included) into each Outdoor Sensor. Replace battery covers.
3. Insert 2-AA batteries (not included) into the back of your Weather Station.
4. Once each Outdoor Sensor is reading to your station, place it outside in a shaded location.
Watch sensor mounting video:
Channel 1
1 2 3
1 2 3
Press and release the SET button to toggle between Full Weekday and 3-Letter Weekday with Month and
Date.
1. Hold the SET/MODE button to enter settings mode.
2. Press the +/HI or -/LO button to adjust the flashing values.
3. Hold the +/HI or -/LO buttons to adjust quickly.
4. Press the SET/MODE button to confirm adjustments and move to the next item.
5. Press the SEARCH button at any time to exit.
W IRE LE S S WE AT HER STAT I O N WI TH TH R EE SEN S ORS
P OW ER U P
http://bit.ly/TH_SensorMounting
Channel 2
Channel 3
1 2 3
1 2 3
Outdoor Sensors
TX141TH-BCHv3
CUSTOM DATE DI S P L AY
COMFORT
S E TT ING S M ENU
1 2 3
1 2 3
Weather Station
308-1412-3TXv2
AA
AA
COMFORT
3 | PAGE