Upright Mounting On Din Rails - Siemens SENTRON 7KN POWERCENTER 3000 Manual

Requirements
● Mounting bracket
Note
Use only the screws supplied to mount the mounting bracket. Longer screws can damage
the interior of the device
● A T10 screwdriver
● Two wall plugs and two screws
Procedure – upright mounting
4.1.3.2

Upright mounting on DIN rails

Upright mounting on DIN rails is suitable for vertical mounting of the device. The mounting
bracket for this permits, space-saving installation with wall mounting.
Requirements
● Mounting bracket
Note
Use only the screws supplied to mount the mounting bracket. Longer screws can damage
the interior of the device
● A T10 screwdriver
● Two wall plugs and two screws
7KN POWERCENTER 3000
Manual, 10/2019, L1V30579222003-01
Installing, connecting, commissioning
1. Place the mounting bracket on the mounting
surface.
2. Mark out the mounting holes.
3. Drill the mounting holes.
4. Place the wall plugs in the drill holes.
5. Fasten the mounting bracket with 2 screws.
6. Screw the device to the mounting bracket with
the two screws supplied.
4.1 Preparing installation
23