Preface - Siemens IFP1900 INOX PRO Compact Operating Instructions

Preface

Validity
This document applies to devices with the designation IFP1900 INOX PRO, article numbers:
● IFP1900 INOX PRO Stand variant with operator controls, article number
6AV7484-6AB00-0AA0
● IFP1900 INOX PRO Support arm variant, article number with operator controls, article
number 6AV7484-6AB10-0AA0
● IFP1900 INOX PRO Stand variant without operator controls, article number
6AV7484-6AB01-0AA0
● IFP1900 INOX PRO Support arm variant, article number 6AV7484-6AB11-0AA0
In relation to the operation, the IFP1900 INOX PRO is identical with the base unit IFP1900
Touch Standard.
This document describes the mechanical and electrical differences between the device and
the base device IFP1900 Touch Standard.
The notes contained in this document take precedence over the information contained in the
documentation of the basic device, in the release notes and in the online help.
You can find the documentation of the basic device on the Internet at the following address:
Operating Instructions Industrial Flat Panels IFP, IFP PRO, IFP ETH
(http://support.automation.siemens.com/WW/view/en/65288650)
Conventions
The term "device" is also used instead of the product designation in this document.
"Windows 7" is used as an abbreviation for "Windows 7 Ultimate".
Figures
This document contains figures of the device described. The figures can deviate from the
particularities of the delivered device.
IFP1900 INOX PRO
Compact Operating Instructions, 07/2019, A5E35751632-AC
3