Pfaff 3701 Series Supplement To The Instruction Manual page 8

Controls
Stitch counting
TE/Speed
Scrolling
PM
F1
No function assigned
F2
No function assigned
F3
No function assigned
F4
No function assigned
8
If this key is pressed the corresponding function is switched on or off. When the function
is switched on, the machine moves to the next seam section after sewing the number of
stitches entered.
In the programmed sewing mode, the number of stitches is entered by stitching them off.
If this key is pressed once, the machine changes to parameter input.
If this key is pressed twice (within 5 seconds) the machine changes to stitch input.
If this key is pressed in the programmed sewing mode, the machine scrolls through the
input menus on the display.
If this key is pressed the programmed sewing function is switched on or off. When the
function is switched on, the letters "PM" appear on the display of the control panel. The
parameters related to the program are shown in the alpha-numerical part of the display.