Table of Contents
Advertisement
48 Listing Services
1. Plug one end of a RS-232 cable (9 pin D-
sub cable) into the RS-232 port on the
digital receiver, and the other end into
the matching port on the other digital re-
ceiver.
2. Turn on the source digital receiver.
3. Select the Installation
Transfer Data to Other IRD menu, then
you get asked for confirmation; select
Yes.
4. To start the data transfer, turn on the target
digital receiver.
5. A progress bar appears showing the
progress of the data transfer.
6. Restart the target digital receiver when the
data transfer is complete.
Transfer Firmware
Advertisement
Table of Contents
