From Another Digital Receiver Via Rs232 Port - Topfield TF6000F User Manual

38

6.1.3 From another Digital Receiver via RS232 Port

1. Download a new firmware applicable to the digital re-
ceiver from the Topfield website.
2. Download TFD-Down from the Topfield website.
3. Plug a RS232 cable into the RS232 port on the digital
receiver and the corresponding port on your computer.
4. Turn on the digital receiver.
5. Run TFD-Down .
How to use TFD-Down is as follows.
It is possible to transfer a new firmware to the digital receiver
from another digital receiver connecting them by a RS232 ca-
ble to update the firmware only if they are the same model.
How to update the firmware with this method is as follows.
1. Plug a RS232 cable into the RS232 port on the digital
receiver and the other's.
2. Turn on them.
3. Select the Installation > Transfer Firmware to Other IRD
menu .
Firmware Update and Data Transfer
£
¢ ¡
1. Press button to select the new
Find
firmware file.
£
¢
2. Press
Download
transfer.
£
3. Press button to cancel the file trans-
¢ ¡
Stop
fer.
¡
button to start the file