Antenna Connection
The OneRemote DAB/FM tuner may be connected to any antenna picking up the FM and
the DAB frequencies.
If the FM signal strength is not sufficient the reception will be noisy.
If the DAB signal strength is not sufficient the reception is varying from disturbing
"bubbles" to complete quietness.
Option Programming
Option programming is required only, when installing the tuner. The programming is
performed with a Bang & Olufsen remote control terminal by pressing a 5 button
sequence within 4 seconds after powering up the tuner.
When powering up the tuner the red control lights up for 4 seconds, and the programming
has to take place before the control turns off. If not successful the operation may be
repeated.
Programming starts by pressing STOP and ends by pressing RECORD. All options have
3 digits to be entered in between.
Option 106 is entered like this:
STOP – 1 – 0 – 6 – RECORD
22