THE DIFFERENT PHONE ELEMENTS INSTALLATION WALL MOUNTABLE SETTING THE RING VOLUME OPERATION 5.1 Last number redial 5.2 Flash function 5.3 Pause button (redial) 5.4 Memory numbers 5.4.1 To save memory numbers 5.5 To call a memory number 5.6 Dialling in semi-handsfree mode 5.7 On hold (music on hold) 5.8 Timer 5.9 Memory control...
Orion 1 THE DIFFERENT PHONE ELEMENTS 1 Coil cord (receiver) 2 Loudspeaker 3 Hook (to hang up the receiver of a wall unit) 4 Hook switch 5 Telephone line 6 LCD display 7 Control button 8 Timer button 9 Indirect memory numbers...
Orion 2 INSTALLATION • Plug one end of the phone cable into the telephone line wall socket and the other end into the back of the unit. • Connect the coil cord from the receiver into the side of the phone .
5.4 Memory numbers The Orion is equipped with 3 direct memory numbers (M1, M2 and M3) for which you have to press only 1 button. The phone also has 10 indirect memory numbers; to call them you have to press 2 buttons.
1. Pick up the receiver or press the Semi-handsfree button to take the line. 2. Press the ”STORE” button. 3. Enter the telephone number that you wish to save in the memory. 4. Press the ”STORE” button again. 5. Enter the desired memory location (numerical buttons 0-9).
2. Adjust the volume by means of the volume switch for the semi-handsfree mode. 3. Wait until you hear the dial tone and enter the desired telephone number. The number is shown on the display. 4. Wait until the called person answers and then pick up the re c e i v e r.
Orion 5.7 On hold (music on hold) 1. If you want to put a call on hold, press the Hold button, the On Hold indicator lights up. 2. When a call has been put on hold, the speaker is activated to check the line.
Orion 6 WARRANTY Warranty: 1 year Ask your dealer for your free swop warranty. Attention : Do not forget to include your purchase invoice when you return the defect device.