Personalisation; Adjusting Speaker Volume; Adjusting Ring Volume - Topcom COCOON 400 User Manual

Cocoon 400

4. PERSONALISATION

4.1 ADJUSTING SPEAKER VOLUME

There are two ways to set the speaker volume:
4.1.1 Speaker volume during call
During conversation, press the
(1-5). Press OK to confirm.
Note: The handsfree volume is also adjusted together with the receiver in the handset as
described above!

4.2 ADJUSTING RING VOLUME

4.2.1 Handset ring
You can adjust the ring volume during a incoming call by pressing the Up
Down keys. The default ring volume can be set as follows:
1. Enter the menu by pressing MENU.
2. Select HANDSET using the
3. Press OK.
4. Select VOLUME using the
5. Press OK.
6. Select the desired volume OFF or 1 to 5).
7. Press OK to confirm or
Note: Every setting is confirmed at the end by a double or single long beep. A double bleep
confirms the validation of your choice.
A long bleep signifies that the modification has not been taken into account.
4.2.2 Base ring
1. Enter the menu by pressing MENU.
2. Select BASE.
3. Press OK.
4. Select UNPROTEC.
5. Press OK.
6. Select VOLUME.
7. Press OK.
8. Select the desired volume (OFF or 1 to 5) by means of the Up
keys.
9. Press OK to confirm or
A double bleep confirms the validation of your choice.
A long bleep that the modification has not been taken into account.
or key to change the volume accordingly
and keys.
and keys.
to return to the previous menu.
to return to the previous menu.
73
or
and Down