Attaching Your Integrated Microphone/Receiver; Headset (Earpiece); Wearing Your Integrated Microphone/Receiver; Headset - Motorola OPERATIONS CRITICAL WIRELESS Manual

ATTACHING YOUR INTEGRATED
MICROPHONE/RECEIVER HEADSET
(EARPIECE)
The following steps describe how to attach/detach your
earpiece:
1. To attach and lock the earpiece, push the connector in and
turn the connector clockwise so that the "unlock" symbol is
NOT aligned with the recess on the front housing.
2. To unlock and detach the earpiece, turn the connector
counterclockwise so that the "unlock" symbol aligns with the
recess on the front housing and pull the connector out.
Note: Please attach your earpiece prior to establishing the
connection with radio.
Note: If the earpiece is replaced or re-attached, the accessory
must be powered off and powered back on to ensure proper
detection and operation of the earpiece with the accessory.
Note: The wireless link is dropped upon accidental or intentional
removal of the earpiece from the device.
WEARING YOUR INTEGRATED MICROPHONE/
RECEIVER HEADSET
The Integrated Microphone/Receiver Headset represents a
breakthrough in voice processing technology. The receiver and
microphone are both built into a lightweight, ergonomic
earpiece, which enables you to hear and be heard even in high
noise conditions. The earpiece does not block normal hearing
which allows important background sounds to be heard.
The earpiece can be worn on either ear by swiveling the flower
tip of the ear tube accordingly.
Note: If poor transmit audio is experienced in windy conditions,
install the foam windscreen to decrease wind noise.
1. Ensure the ear tube is
facing the ear canal.
2. Place the Earpiece over
your ear for correct fit.
5