BIOS Setup
BIOS Setup
▶
Super IO Configuration
▶
Serial Port 1/ 2/ 3/ 4/ 5/ 6
This setting enables/disables the specified serial port.
▶
Device Settings
This item shows the address & IRQ settings of the specified serial port.
▶
Change Settings
This setting is used to change the address & IRQ settings of the specified
seral port.
▶
Mode Select
Select an operaton mode for the seral port 1.
▶
Voltage Select
Select an operation voltage for the specified serial port.
▶
Parallel Port
Ths settng enables/dsables the parallel port.
▶
Device Settings
Ths tem shows the address & IRQ settngs of the parallel port.
▶
Change Settings
Ths settng s used to change the address & IRQ settngs of the parallel
port.
▶
Device Mode
Select an operaton mode for the parallel port.
3-8