Advertisement
Instructions For Use
Remote control instructions
• Note: effective range of the remote control is within 5m distance and 30 degree
range in front of the tower fan.
Display panel instructions
Press a key on the unit to activate a corresponding function.
• Press [OSC] key to activate or deactivate swing/oscillation function
• Press [SPEED] key to rotate between 3 different wind speeds
• Press [MODE] key to rotate between the different wind modes
Normal Mode: Operates normally with the selected wind speed
Natural Breeze Mode: The fan speed automatically shifts through different wind
speeds to imitate a natural wind speed rhythm.
Sleep Mode: The fan will automatically lower the set wind speed in intervals
depending on the speed setting chosen and then run continuously at low speed.
Sleep on High: high speed for half an hour, then medium speed for half an hour, then
low speed continuously.
Sleep on Medium: medium speed for an hour, then low speed continuously.
Sleep on low: low speed continuously.
• When the tower fan is on, press the [TIMER] key to set the tower fan to
automatically shut down after 0.5 - 7.5hrs. Alternatively in stand-by mode you
can pre-set the fan to start in 0.5 - 7.5hrs.
Advertisement
