Topcom Skyr@cer WBR 7101GMR User Manual page 76

Filter client PC by MAC address Check "Enable MAC Filtering" to enable MAC
Add PC
Remove PC
You can now configure other advance sections or start using the router (with the advance settings
in place)
want remove all PCs from the table, just click
"Delete All" button.
Filtering.
Fill in "Client PC MAC Address" and "Comment"
of the PC that is allowed to access the Internet, and
then click "Add". If you find any typo before
adding it and want to retype again, just click
"Reset" and the fields will be cleared.
If you want to remove some PC from the "MAC
Filtering Table", select the PC you want to remove
in the table and then click "Delete Selected". If you
want remove all PCs from the table, just click
"Delete All" button. If you want to clear the
selection and re-select again, just click "Reset".
76