Topcom Skyr@cer WBR 7101GMR User Manual page 62

2.6.1 Port Forwarding
The Port Forwarding allows you to re-direct a particular range of service port numbers (from the
Internet/WAN Ports) to a particular LAN IP address. It help you to host some servers behind the
router NAT firewall.
Parameter
Enable Port Forwarding
Private IP
Type
Port Range
Comment
Add Port Forwarding into the table
Description
Enable Port Forwarding
This is the private IP of the server behind the
NAT firewall.
Note: You need to give your LAN PC clients a
fixed/static IP address for Port Forwarding to
work properly.
This is the protocol type to be forwarded. You
can choose to forward "TCP" or "UDP" packets
only or select "both" to forward both "TCP" and
"UDP" packets.
The range of ports to be forward to the private IP.
The description of this setting.
Fill in the "Private IP", "Type", "Port Range" and
"Comment" of the setting to be added and then
click "Add". Then this Port Forwarding setting
will be added into the "Current Port Forwarding
Table" below. If you find any typo before adding
62