NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Using the alignment posts, align and place the speakers on the palm rest.
2. Route the speaker cable through the routing guides on the palm rest.
3. Turn the computer over.
4. Slide the speaker cable through the slot on the computer base and connect the speaker cable to the system board.
Post-requisites
1. Follow the procedure from step 2 to step 6 in
2. Replace the keyboard.
3. Follow the procedure from step 3 to step 6 in
4. Replace the
base
panel.
5. Replace the battery.
36
Replacing the speakers
Replacing the speakers
computer. After working inside your computer, follow the instructions in
"Replacing the palm
rest".
"Replacing the hard
drive".
22
After