Connecting Directly To Video Equipment - Sony CPJ-A300E Operating Instruction

Preparations (continued)
Tip
This projector accepts
the video signals of
both NTSC and PAL
color systems.
Notes
• Turn off the video
equipment and the
projector before
connecting.
• Refer to the video
equipment's manual
as well.
If you switch from the
LASER LINK system
"VIDEO" appears
when you project the
picture. The display
will go off after 5
seconds.
VIDEO
8
-GB Preparations
Connecting directly to video
equipment
Connect video equipment such as a VCR or video
camera recorder using the supplied A/V
connecting cable.
Make sure that the LASER LINK indicator of the
control panel is off.
VIDEO
L
AUDIO
R
to AUDIO OUT
: Signal flow
Front
to VIDEO OUT
to VIDEO IN
A/V connecting cable
(supplied)
to
AUDIO
IN