Sony CPJ-A300E Operating Instruction page 18

Adjusting the picture (continued)
Note
"HUE" does not appear
when the PAL color
system video signal is
input.
18 Adjusting the picture
-GB
2
Press + or – so that the picture contrast becomes
appropriate.
• For more contrast, press +.
• For less contrast, press –.
If you do not press any button, the display will go
off after 5 seconds.
Adjusting the hue (NTSC color
system only)
1
Press FUNCTION until "HUE" appears.
HUE
2
Press + or – so that the hue becomes appropriate.
• If the picture is too reddish, press +.
• If the picture is too greenish, press – .
If you do not press any button, the display will go
off after 5 seconds.
Adjusting the color intensity
1
Press FUNCTION until "COLOR" appears.
COLOR
2
Press + or – so that color intensity becomes
appropriate.
• For more color intensity, press +.
• For less color intensity, press –.
If you do not press any button, the display will go
off after 5 seconds.