Panasonic ES-LV6Q Operating Instructions Manual page 16

Problem
The shaving sensor
responds even though the
shaver is not in contact
with the skin.
Operating time is short
even after charging.
Shaver does not operate
even after charging.
16
ES-LV6Q_US.indb 16
Action
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 13.)
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
This can be improved by cleaning
every time after shaving.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
Use the appliance in an ambient
temperature approximately 5 °C
(41 °F) or higher.
The battery has reached the end
of its life.
The shaver will not operate with
the AC adaptor connected.
Please use the shaver after it has
been sufficiently charged and the
AC adaptor disconnected.
Problem
The shaving sensor is operating.
The driving sound
The sound changes depending on
changes while shaving.
the beard thickness.
Apply oil.
The blades will not move
smoothly when there is no oil on
the blades, requiring more power.
The shaver makes a high‑pitched
sound due to the linear motor drive.
Makes a loud sound.
This does not indicate a problem.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush.
This can be improved by cleaning
The odor is getting stronger.
every time after shaving.
This can be improved by cleaning
every time after shaving.
Shavings fly out in all
Clean the inner blades with the
directions.
brush when shavings are
adhering to the inner blades.
Apply oil.
Replace the system outer foil if it
System outer foil gets hot.
is damaged or deformed.
(See page 14.)
Action
2018/03/02 15:53:10