Preparation - Panasonic ES-LV6Q Operating Instructions Manual

 Inner blades
 Trimmer
 Trimmer handle
  AC adaptor (RE7-87)
 Adaptor
 Power plug
 Cord
 Appliance plug

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug into
the shaver�
2
Plug the adaptor into a
household outlet�
• Check that the charge status lamp
( ) is glowing.
• Charging is completed after approx.
1 hour.
• If the shape of the plug does not fi t the
power outlet, use an attachment plug
adaptor of the proper confi guration.
3
Disconnect the adaptor after charging is completed�
Note
You cannot operate the shaver while charging.
10
ES-LV6Q_US.indb 10
Accessories
 Travel case
 Cleaning brush
 Oil
2
1
While charging
glows.
The number of the battery
capacity lamp will increase as
charging progresses.
Notes
• When charging the shaver for the fi rst time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp (
minutes. It will eventually glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C (50 °F – 95 °F). It may take longer to charge, or
the charge status lamp ( ) will blink quickly and the battery may
fail to charge properly in extremely high or low temperatures.
• The shaver can be used for approximately 2 weeks with a full charge.
(Based on one 3‑minute dry‑shave usages per day in an ambient
temperature range of 20 °C – 30 °C (68 °F – 86 °F).)
The number of usable days varies depending on the following
conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Usage frequency of the sonic vibration cleaning mode
• If there is noise from the radio or other sources while using or charging
the appliance, move to a different location to use the appliance.
After charging is completed
All the battery capacity lamp
and will glow and then turn
off after 5 seconds.
) may not glow for a few
2018/03/02 15:53:06