Daewoo DTW-28W2F Service Manual page 34

66 cm wide stereo
Hide thumbs Also See for DTW-28W2F:
Table of Contents

Advertisement

5-3. CIP3250A (Component Interface Processor)
(1) Description
The CIP 3250A is a new CMOS IC that contains on a sin-
gle chip the entire circuitry to interface analog YUV/RGB/
Fast Blank to a digital YUV system. The Fast Blank signal
is used to control a soft mixer between the digitized RGB
and an external digital YUV source. The CIP supports var-
ious output formats such as YUV 4:1:1/4:2:2 or RGB 4:4:4.
Together with the DIGIT 3000 (e.g. VPC 32xxA) or DIGIT
2000 (e.g. DTI 2250), an interface to a TV-scanrate con-
version circuit and/or multi-media frame buffer can be
obtained.
(2) Feature
- analog input for RGB or YUV and Fast Blank
- triple 8 bit analog to digital converters for RGB/YUV with
internal programmable clamping
- single 6 bit analog to digital converter for Fast Blank
singnal
(3) Block Diagram
All manuals and user guides at all-guides.com
- digital matrix RGB => YUV (Y, B-Y, R-Y)
- luma contrast and brightness correction for signals from
- color saturation and hue correction for signals from
- digital input for DIGIT 2000 or DIGIT 3000 formats
- digital interpolation to 4:4:4 format
- high quality soft mixer controlled by Fast Blank signal
- programmable delays to match digital YUV in and analog
- variable low pass filters for YUV output
- digital output in DIGIT 2000 and DIGIT 3000 formats, as
-
- clock frequency 13.5...20.25 MHz
7
analog input
analog input
RGB/YUV
well as RGB 4:4:4
2
bus interface
I C
APPENDIX
IC DESCRIPTION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtw-2810f

Table of Contents