Control Pad Features; For A Silent Control Panel; Temperature Conversion - Kenmore 790.4019 Series Use & Care Manual

Contro Pad Features
Note: The appearance of your oven controU may differ sHghtUyfrom the one HUustratedbebw, However, aH functions
are the same, Also, push buttons or pads may be shaped differently than those appearing in this Use and
Care Guide,
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described bebw,
OVEN
mNTERIOR
LIGHT PAD set the time
Used to turn of day.
oven interior light _\
ON
Used to set or cancel
the minute timer. The
minute timer does not"'_
start or stop cooking.
Also, TIMER SET/OFF
Pad is used to set the
Continuous Bake
Feature.
SELECT CLEAN
PAD Used to select
the Self-Cleaning
cycle. A 2, 3 or 4
hour Self-Clean time
may be selected
(some models).
CLOCK SET COOKTIME
PAD Used to PAD Used to
enter the length UP and DOWN ARROWS PADS Used along with the function
of the baking pads to select oven temperature, cook time, start time (when
time. \ programming an automatic start time), time of day, clean time
X and minute timer.
H
@ .@ @
/@Preheat
, PREHEAT & DOOR LOCK UGRTS* The "Oven" might
will glow each time the oven unit turns on to maintain the set
oven temperature. The "Preheat" light will glow when the oven
is first set to operate, or if the desired temperature is reset
higher than the actual oven temperature. The "Door Locked"
light will flash until the door locks when the self-clean cycle is in
use. It glows constantly after the door locks (some models).
DELAY START PAD Used to set the
desired start time for baking. May be
used with COOK TIME to program a
delayed bake cycle or a delayed clean
cycle.
BAKE PAD--
Used to select
the bake
function. FEATURE
INDICATOR
UGRTS--
These light to
__ show wMch
@'/_ feature is in use.
BROIL PAD--
Used to select
the variable broil
O function.
_-_-_ WARM & HOLD
PAD-- Used to
set the Warm &
Hold feature.
STOP CLEAR PAD-- Used to clear
any function previously entered
except the time of day and minute
timer. Press STOP CLEAR to stop
cooking. Also the STOP CLEAR
pad is used to activate oven lockout
setting. (some models).
*Note: The OVEN indicator light on the electronic display wiii turn ON and OFF when using the Bake feature and
during preheat, This is normal and indicates that the oven is cycling to maintain the selected baking temperature,
When preheat indicator light turns OFF, your oven is ready,
For a silent contro_ pane_:
When choosing a function, a beep will be heard each time a pad is pressed, If desired, the control can be programmed
for silent operation,
1, To tell if your oven is set for normal or silent operation press and hold _s_,_._ for 7 seconds, "- - "or "SP" (speaker)
appears in the display,
2, Within 5 seconds, press the A or v pad to switch between normal sound operation and silent operation mode,
The display will show either "- - " or "SP",
3, Wait 5 seconds to return to normal operating mode,
If "SP" appears, the control will operate with normal sounds and beeps, If "- - " appears, the control is in the silent
operation mode,
Temperature Conversion
(Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory, The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C),
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Ctean mode):
1, Press and hold , for 7 seconds until °F or °C appears in the display,
2, Press the A or v pad to change °F to °C or °C to °F,
8, Wait 5 seconds to accept the changes or press i to reject the changes,