General Settings - Psm - JVC KD-APD38 Instructions Manual

General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2
Select a PSM item.
Indications
DEMO
Display
demonstration
CLK DISP* 1
Clock display
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
DIMMER
Dimmer
SCROLL* 2
Scroll
* 1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select "OFF" to
save the car's battery.
*
2 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
14
Item Setting, [reference page]
( : Initial)
• DEMO ON : Display demonstration will be activated automatically if no operation
is done for about 20 seconds, [6].
• DEMO OFF : Cancels.
• ON : Clock time is shown on the display at all times when the power is
turned off.
• OFF : Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [6].
1 – 12 [Initial: 1 (1:00)], [6].
00 – 59 [Initial: 00 (1:00)], [6].
• ON : Dims the display illumination.
• OFF : Cancels.
• ONCE : Scrolls the track information once.
• AUTO : Repeats scrolling (at 5-second intervals).
• OFF : Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.