Installing Or Reinstalling Barco Dpms; Uninstalling Barco Dpms - Barco DICOM THEATER System Manual

10. Save your preferences by pressing the "Save As" button and
entering a new profile name in the "Save Profile Setting" dialog
box.
11. Apply your new scheme by clicking "OK".
12. Click "OK" again to close the "Display Properties Control Panel".

Installing or Reinstalling BARCO DPMS

To install or reinstall the BARCO DPMS Screen Saver insert the
CORONIS Software CD in the appropriate device on your computer
and run the BarcoMed Product Install Wizard (please see the section
Software Installation for complete instructions).
Special Note: Reinstalling the BARCO DPMS Screen Saver will over
write the DPMS configuration settings and you will need to reconfigure
the DPMS settings on your system.

Uninstalling BARCO DPMS

To remove the BARCO DPMS Screen Saver from your system insert
the CORONIS Software CD in the appropriate device on your
computer, run the BarcoMed Product Install Wizard and follow these
steps.
1. Select only the DPMS Screen Saver on the BarcoMed Product
Install Wizard's welcome screen and click "Install".
2. Click "Next" on the Welcome Screen of the BARCO DPMS
InstallShield Wizard to begin the installation (figure 33)
System manual DICOM Theater
Figure 33
67