Kenwood KMM-BT728HD Instruction Manual page 14

HD Radio™ Tuner
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit <http://www.hdradio.com>.
Search for a station
1 Press B SRC repeatedly to select HD RADIO.
2
Press BAND repeatedly (or press #FM+/*AM– on the remote control)
to select FM1/FM2/FM3/AM.
3 Press S / T (or press S / T (+) on the remote control) to
search for a station or channel.
You can store up to 18 stations for FM, 6 stations for AM and 18 channels for
HD Radio.
• To store a station or channel: Press and hold one of the number buttons
(1 to 6).
• To select a stored station or channel: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on the remote
control).
Direct Access Tuning
(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a station frequency or channel
number.
3 Press ENT IW to search for station or channel.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
8
ENGLISH
(for / )
Select an HD Radio multicast channel
Many HD Radio stations offer more than one channel programming. This
service is called multicasting.
While receiving HD Radio multicast channels....
Press S / T to select your desired channel (HD1 to HD8).
"LINKING" appears while linking to a multicast channel.
Receive an Emergency Alert message
You can receive an emergency alert message while listening to another
source or while in STANDBY, via HD Radio Broadcast.
Activate emergency alert message reception
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [TUNER SETTING], then press the knob.
3
Turn the volume knob to select [EA], then press the knob.
4
Turn the volume knob to select [ON], then press the knob.
5
Press and hold to exit.
• To deactivate emergency alert message reception, select [OFF] in step 4.
• To return to the previous setting item, press
Receive an emergency alert message
When an emergency alert message is received, it appears and remains on
the display until the user performs the "Ignore" function.
Press B SRC (or press SRC on the remote control) to ignore the alert
message.
The same emergency alert message will not interrupt again for 12 hours.
.