Roland V-Synth XT Service Notes page 26

MAY.2005
sine wave, at sampling rate of 96kHz.
Press [ ] to proceed to the next step.
Connect the external digital audio input device (MA-10D, etc.), to OUT A
(optical) jack.
Check the sound or wave shape of connected external device.
The digital audio data from OUT A; L channel is triangle wave and R channel
is sine wave, at sampling rate of 48kHz.
Press [ ] to proceed to the next step.
Check the sound or wave shape of connected external device.
The digital audio data from OUT A; L channel is triangle wave and R channel
is sine wave, at sampling rate of 44.1kHz.
Press [ ] to proceed to the next step.
Problem
The sound is not output in all the
tests.
The sound is not output from
MAIN OUT.
The sound is not output from DI-
RECT OUT.
COAXIAL-IN NG
COAXIAL-OUT NG
OPTICAL-IN NG
OPTICAL-OUT NG
6:LCD Test
fig.13-7.eps
Check the LCD.
Press [ ].
A pattern in eight-level grayscale will appear in the LCD.
Turn the contrast adjustment knob all of the way to left and right, and verify
that the contrast changes.
Then adjust the knob for optimal contrast.
30
Items of check
Confirm the all of FPC cable from
JACK BOARD are surely connect-
ed.
MAIN BOARD: IC99
JACK BOARD: IC1,IC22,CN12
MIC BOARD: IC13
MAIN BOARD: IC98
JACK BOARD: IC2
MAIN BOARD: IC95
JACK BOARD: IC9
MAIN BOARD: IC95
JACK BOARD: IC9,T1
MAIN BOARD: IC95
JACK BOARD: CN5
MAIN BOARD: IC95
JACK BOARD: CN4
fig.13-8.eps
Press [ ].
A pattern in seven color stripes will appear in the LCD.
Verify that pixel defect or irregular of color.
fig.13-9.eps
Press [ ].
Verify that all-pixel-on screen is not missing any pixels, and that the darkness
is uniform.
fig.13-10.eps
Press [ ].
Verify that all-pixel-off screen has no pixels "stuck on".