Schlage BE469 Installation Instructions

*24156804*
24156804
Touchscreen Deadbolt with Alarm
Thick Door kiT insTAllATion insTrucTions
MoDel Be469
This kit is used to fit the Touchscreen Deadbolt with Alarm to doors that are between 1M\," and 2Z\v" thick.
L if you are uncomfortable performing these steps, call a locksmith for assistance.
1
Determine the thickness of your door.
2
choose screws and Tailpiece length
2a select the screws using the chart below.
Door
Thickness
2Z\," - 2Z\v"
1M\," - 2"
2b select the tailpiece length, using the chart below.
Door
Thickness
2Z\," - 2Z\v"
1M\," - 2"
Door Thickness
1M\," to 2Z\v"
screw length
(Actual size)
Tailpiece length
(Actual size)
Break off and discard
3
replace the Tailpiece
3a remove the cylinder screw from the Touchscreen.
3b remove the cylinder from the Touchscreen.
3c remove the cylinder cap, washer and tailpiece.
Use a paperclip or similar to press and
hold down the pin. Then unscrew the cap.
The washer and tailpiece can then easily
be removed. Leave the pin in place.
Washer
Tailpiece
Cap
Pin