Step 2 Fixing The Outdoor Unit In Place - Samsung AC MXADKH Series Installation Manual

300 600
or more or more
300 or more
300 or more
CAUTION
• The outdoor unit must be installed according to the
specified distances in order to permit accessibility
from each side, to guarantee correct operation,
maintenance, and repair of the unit.
The components of the outdoor unit must be
reachable and removable under safe conditions for
people and the unit.
WARNING
• Should adopt bar type louver. Don't use a type of rain
resistance louver.
[Bar type louver]
• Louver specifications.
– Angle criteria : less than 20˚
– Opening ratio criteria : greater than 80%
600 600
or more or more
[Rain resistance louver]
Moving the outdoor unit with wire rope
1 Before carrying the outdoor unit, fasten two wire
ropes of 8 m or longer, as shown in the figure.
2 To prevent damages or scratches effectively, insert
a piece of cloth between the outdoor unit and the
ropes.
3 Move the outdoor unit.

Step 2 Fixing the outdoor unit in place

Install the outdoor unit on a rigid and stable base to
prevent disturbance from any noise caused by vibration.
When installing the unit at a height or in a location
exposed to strong winds, fix the unit securely to a
support (i.e., a wall or a ground).
Fix the outdoor unit with anchor bolts. Make sure that
the anchor bolts are 20 mm or higher from the base
surface.
AC026/035MXADKH/AC052MXASEH
Anchor bolt hole
612
790
Wire rope
Plate protection
cloth
(Unit : mm)
7
English