Boil-Dry Protection; User Maintenance Instructions - Westinghouse WST4015ZE Owner's Manual

BOIL-DRY PROTECTION

A safety thermostat will automatically operate should your Kettle be
accidentally plugged in without any water, or if the Kettle is without
sufficient water, or if the Kettle is allowed to boil dry. To reset the boil-
dry protection device, you must remove the Kettle from the Power
Base and allow it to cool before refilling with water.

USER MAINTENANCE INSTRUCTIONS

This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Any servicing
requiring disassembly other than cleaning, must be performed by a
qualified appliance repair technician.
CLEANING YOUR JUG KETTLE
CAUTION: Do not immerse Kettle or Power Base in any
liquid, or place in a dishwasher to be cleaned.
1. Raise the ON/OFF Lever into the OFF position and unplug unit.
Allow unit to cool before cleaning.
2. Open the Lid by pressing the Lid Release Button under the handle
and hold down.
3. Remove the Scale Filter from inside the Kettle (located just inside
the Spout) by lifting it up and out from the inside of Kettle. (See
Figure 4.)
Rinse under running water and use a soft brush if necessary.
(Do not use a metal brush.) Do not wash in dishwasher. Place
Scale Filter back into position.
Figure 4
7