Operation - Bartscher A100266 Instruction Manual

•
The electrical circuit of the socket must be secured to at least 16A. Only connect
the device to a wall outlet; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible so as to quickly disconnect the
device if the need arises.

5.3 Operation

Before first use
o Before using the foodwarmer, wash the removable ceramic insert and glass lid in
warm water with a mild cleaning agent, rinse with clean water and dry thoroughly.
o Wipe down the outer pot on the inside and outside with a soft, moist cloth to remove
dust from packing and transport.
CAUTION!
Never immerse the outer pot in water or other liquids, do not wash under running
water nor in a dishwasher.
o After cleaning, replace the ceramic insert inside the outer pot. Ensure that all parts
are completely dry.
CAUTION!
Do not pour any liquids into the outer pot!
o Pour a small amount of water into the ceramic insert and place the glass lid on it.
Never use the device when completely dry, and do not turn the device on when
there is no food inside.
o Insert the plug into an appropriate grounded socket and set the temperature dial to
the highest setting marked "
on for around 30 minutes. A slight odour may be detected, which will quickly
disappear.
o After around 30 minutes, set the temperature dial to the OFF setting marked "
and remove the device's plug from its socket.
o Leave the device to cool for approx. 20 minutes, remove the lid and take out the
ceramic insert.
" (see "Setting the temperature"). Leave the device
"
- 23 -