Melitta MEFB6B Owner's Manual page 10

Brewing Coffee - Programming Delay Timer
1. Follow steps 1 – 8 in BREWING COFFEE – IMMEDIATE START.
2. Be sure clock is set to the current time (see SETTING THE CLOCK
instructions on Page 6).
3. Press the PROG Button once and release. The Indicator Light will
flash and the time will show 12 : 00.
4. Set the desired program start time by using the HOUR and MIN
Buttons as previously described in SETTING THE CLOCK.
5. During the setting, AM/PM on the display will change
automatically.
6. Press the PROG Button again to complete the programmed start
time setting.
7. After setting, press the AUTO ON/OFF Button once to activate the
programmable function. The Indicator Light will flash to signify the
timer is set.
NOTE: When using the Immediate Start mode after a Programmed
cycle has been used, without unplugging the unit in-between, it may
be necessary to press the AUTO ON/OFF Button two times. The
first time the Indicator Light will flash; the second time the Light will
turn solid and brewing will begin.
8. If you wish to serve a cup of coffee during the brew cycle, simply
remove Carafe from Warming Plate. Dripping will automatically
cease. Return Carafe to position on Warming Plate within 30 sec-
onds; dripping will resume. If the Carafe is not returned to the
Warming Plate, the coffee may overflow from the Filter Holder.
9. When brewing is completed, the Coffee Maker switches to a Keep
Warm mode which will hold coffee at the proper serving tempera-
ture. To keep the coffee hot, place the Carafe back on the Warming
Plate when not serving.
10. Press the AUTO ON/OFF Button again to turn the unit OFF when
not in use. When the brewing cycle is over, the Coffee Maker will
automatically shut off after two hours. The Indicator Light will turn off.
11. Allow the unit to cool for 10 minutes between cycles.
WARNING: Warming Plate is hot! Do not touch bottom of Carafe or
Warming Plate during or after brewing.
9