Advertisement
Operating the knobs and switch
1H
Volume knob
Tone knob (treble)
Toggle switch
Tone knob (bass)
Volume knob: The 1H model has one volume knob, whereas the 2S model has a vol-
ume knob for each pickup.
Tone knob: The 1H model has dedicated knobs for treble and bass. These knobs will
boost or cut the sound accordingly. Both knobs feature center detents. The 2S model
has a two-ring knob with center detent. The upper ring is for boosting/cutting the treble,
and the lower ring is for the bass.
Toggle switch: Switching this towards the knobs will activate the internal preamp and
enable the tone knob(s). Switch this towards the pickup to bypass the internal preamp.
The pickup will operate in passive mode, and the tone knob(s) will be disabled.
The preamp power will be off until you insert a plug into the output jack.
2S
Volume knob (neck side pickup)
Volume knob (bridge side pickup)
Toggle switch
Tone knob (upper: treble; lower: bass)
6
Advertisement
