Replacing The Predecessor Device With A Comfort Hmi Device - Siemens SIMATIC HMI Series Getting Started

1.4

Replacing the predecessor device with a Comfort HMI device

Note
Limited comparability based on display size
Because of the change in display size from 4:3 to "Widescreen", you can only compare the
old with the new HMI devices using the display size to a limited extent.
You must use the following table to determine the suitable replacement device.
Predecessor device
OP 77B
TP 177B 4" Color
TP 177B Mono
TP 177B Color
TP 277
MP 177
OP 177B Mono
OP 177B Color
OP 277
MP 277 8" Touch
MP 277 8" Key
MP 277 10" Touch
MP 277 10" Key
Migration Guide Comfort Panels
Getting Started, 03/2011, A5E03478626-01
1.4 Replacing the predecessor device with a Comfort HMI device
MLFB
6AV6641-0CA01-0AX1
6AV6642-0BD01-3AX0
6AV6642-0BC01-1AX1
6AV6642-0BA01-1AX1
6AV6643-0AA01-1AX0
6AV6642-0EA01-3AX0
6AV6642-0DC01-1AX1
6AV6642-0DA01-1AX1
6AV6643-0BA01-1AX0
6AV6643-0CB01-1AX1
6AV6643-0DB01-1AX1
6AV6643-0CD01-1AX1
6AV6643-0DD01-1AX1
Replaced with MLFB
KP400 Comfort 6AV2124-1DC01-0AX0
KTP400 Comfort 6AV2124-2DC01-0AX0
TP700 Comfort 6AV2124-0GC01-0AX0
KP700 Comfort 6AV2124-1GC01-0AX0
TP900 Comfort 6AV2124-0JC01-0AX0
KP900 Comfort 6AV2124-1JC01-0AX0
TP1200 Comfort 6AV2124-0MC01-0AX0
KP1200 Comfort 6AV2124-1MC01-0AX0
Introduction
9