Toshiba V Series Operation Manual page 9

This manual describes the interface module EN6** (called EN6 module in the manual)
which connects Ethernet serving as a trunk LAN for the Integrated Controller V Series to
the system bus in the Integrated Controller, and also the hardware of the EB6** (called
the EB6 module), presenting an overview, installation and operating procedures, and
instructions for maintenance and inspection.
The EN6 and EB6 are available in the following types, which vary depending on the
interface.
• EN611:
• EN621:
• EN631:
• EN641:
• EB621:
• EB641:
• EN651:
• EN651A:
• EN661:
Be sure to read first the Safety Precautions for you to use the equipment in the correct
way.
Related Document
• Monitoring and Control Network Ethernet Installation and Wiring Manual (6F8C0880)
6F8C0879
Module for 10BASE5 single bus
Module for 10BASE5 dual bus, line A (main module)
Module for 10BASE2 single bus
Module for 10BASE2 dual bus, line A (main module)
Module for 10BASE5 bus, line B (used in combination with EN621)
Module for 10BASE2 bus, line B (used in combination with EN641)
Module for 100BASE-TX/10BASE-T single bus
Module for 100BASE-TX/10BASE-T single bus
Module for 100BASE-TX/10BASE-T dual bus
Preface
vii