Siemens SINUMERIK 840D sl Upgrade Instructions page 3

SINUMERIK 840D sl
AP01583052 AP01584985
AP01589476 AP01589524
AP01592058 AP01594397
AP01597712 AP01598853
====================================================================
Compatibility
====================================================================
SINUMERIK Operate 4.5 SP4 HF3 can be combined with 840D sl NCU 7x0.3 with CNC SW 4.5 SP4 HF3.
The help system is based on the documentation for the CNC SW 4.5 SP2.
The NC alarm texts are based on the CNC SW 4.5 SP2 .
====================================================================
Notes
====================================================================
System:
If, in combination with STEP7, no communication is established between the HMI and the NCU, please
check the settings made under Control Panel / PG/PC interface. There, in addition to S7ONLINE, an access
point
SINUMERIK_CP (SINUMERIK 7xx) -> TCP/IP -> <network card>
must be provided. If required, configure this access point as specified.
To operate the simulation, the NC MD $MC_FRAME_ACS_SET must be set to 1.
If the PC is connected via the network to the X130 of the NCU, the simulation cannot run.
The screen size of Operate on the PC monitor can be set in the file <installation
directory>\user\sinumerik\hmi\cfg\slrs.xml.
[Global]
Resolution =
The new function "network diagnostics" cannot be used on the PC.
In the Machine area, the "Retraction" softkey is no longer available as standard. It can be reactivated by
creating the slmaconfig.xml in /oem/sinumerik/hmi/cfg file with the following content:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<CONFIGURATION>
<Settings>
<ShowRetractSoftkey type="bool" value="true" />
</Settings></CONFIGURATION>
© Siemens AG 2014
Upgrade Instructions
SINUMERIK Operate 4.5 SP4 HF3 for PC
AP01585041
AP01589615
AP01594591
; Permissible values: 640x480, 800x600, 1024x768, 1280x1024
AP01585860 AP01587126
AP01589966 AP01590460
AP01595100 AP01595394
2014-12-16
AP01588294
AP01590715
AP01596303
Page 3 of 3