Setting Inch/Mm Switching - Sony LH61 Instruction Manual

5-1-9. Setting inch/mm switching

• After completing 5-1-6 or 5-1-8, press the X-axis selector key to select the mode for setting
• Inch/mm switching can be enabled or disabled with the
• Inch/mm switching is enabled exfactory.
Example
X
0
or
This completes all the initial settings.
Perform initial settings in the same way for the other axes (Y, Z). First, press the Axis selector key
for the axis for which you want to make the settings.
whether or not inch/mm switching is performed.
Operating Procedure
Select the input to the first axis.
Press the 0 or key.
Pressing the 0 or key again returns to
the original display unit.
0 key or key.
Display
(inch/mm switching enabled)
(inch/mm switching disabled)
(inch/mm switching enabled)
23