Adjusting The Display Backlight - Timex T301 Owner's Manual

Operating the Dual Alarm System (Continued)
Activating the Alarms
1. To activate the radio alarm, press the
Alarm Indicator appears on the display. As long as this indicator appears, the alarm
will sound at the set time and days.
2. To activate the buzzer alarm, press the
Alarm Indicator appears on the display. As long as this indicator appears, the alarm
will sound at the set time and days.
3. When the alarm sounds, press the
maintaining the programmed 7-5-2 alarm settings. To turn off an alarm and cancel its
7-5-2 settings, press its Alarm Button so that its Alarm Indicator no longer appears on
the display.
4. To activate the snooze feature, press the
sounds. The alarm will shut off for approximately nine minutes before sounding again.
The feature can be repeated several times during the one-hour snooze cycle.
5. If it is not turned off, the alarm will sound for an hour before stopping. As long as an
Alarm Indicator appears on the display, the alarm will sound at the set time, according
to the 7-5-2 settings.

Adjusting the Display Backlight

• This alarm clock radio features an adjustable display backlight, with dim, medium, and
bright settings. To select a backlight setting, press the
the desired brightness is reached.
Radio Alarm Button so that the Radio
Buzzer Alarm Button so that the Buzzer
Off/Reset Button to turn off the alarm while still
Snooze/Night-Light Bar when the alarm
Snooze/Night-Light Bar until
9