Table of Contents
Advertisement
This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the implement at all
times. A Manual canister is provided on the implement where this manual can be properly stored. If you lose or damage this
manual a free replacement manual can be obtained from an authorized Bush Hog dealer or by down loading the manual from the
Bush Hog website www.bushhog.com
BEFORE YOU START!! READ, UNDERSTAND, and FOLLOW the information provided in this manual, the AEM Mower Safety
manual and the tractor operator's manual carefully to learn how to operate and service your machine properly. Failure to do so
could result in personal injury to you and bystanders. All implements with moving parts are potentially hazardous. Every effort
has been made to ensure that the machine is safe but operators must avoid engaging in unsafe practices and follow the written
instructions provided. The manufacturer has designed this implement to be used with all its safety equipment properly attached
to minimize the chance of accidents.
SAFETY FIRST. Completely read and understand the safety section of this manual before operating this equipment. Do not allow
anyone to operate this equipment who has not fully read and understood this manual.Contact your Dealer to explain any instruc-
tions that you do not fully understand.
The care you give your Bush Hog Implement will greatly determine your satisfaction with its performance and its service life.
Carefully read and follow the instructions in this manual to provide you with a thorough understanding of your new implement and
its intended use and service requirements.
All references made in this manual to right, left, front, rear, top or bottom are as viewed facing the direction of forward travel with
the implement properly attached to the tractor.
Replacement Parts information is located in a separate Parts Manual. Bush Hog mowers use balanced and matched system
components for blade carriers, blades, cutter shafts, knives, knife hangers, rollers, drivetrain components, and bearings. These
parts are made and tested to Bush Hog specifications. Non-genuine "will fit" parts do not consistently meet these specifications.
The use of "will fit" parts may reduce mower performance, void warranties, and present a safety hazard. Use genuine Bush Hog
mower parts for economy and safety.
For future reference, record your Bush Hog product model number and serial number.
Dealer
Owner
SERIAL NUMBER
LOCATION
To the Owner/Operator/Dealer
Telephone
Purchase Date
Model Number
Serial Number
Advertisement
Table of Contents
